1985-1990 Suzuki LT50 Service Manual, Page 70Get this manual

1985-1990 Suzuki LT50 Service Manual, Page 70

CHASSIS TOE-IN ADJUSTMENT The procedure for adjusting the toe -in is as follows Place the vehicle on level ground and set
B= (2 .55.5 mm) Toe-in .5.5 mm (0.100.22 in ) Temporarily tighten the four lock nuts Ch eck that the di stances and (in illustration)
are equalIf the distances and are not equalreadjust the ti e-rodright or left, whichever makes the toe-in value closer to
the specificationCheck the toe -in again by measuring he distances and If the toe -in is not within specificationrepeat the