1987-2006 Suzuki ATV LT80 Service Manual, Page 68Get this manual

1987-2006 Suzuki ATV LT80 Service Manual, Page 68

ENGI NE SERV ICIN G A piston whose sliding surface is badly grooved or scuffed due to overheating must be replacedShallow
at three positions with the micrometer099QO20205 Service Limit Micrometer (025 mm) 11.980 mm (0.4717 in) PISTON RINGS Check
each ring for end gap, reading the gap with thickness gauge shown in FigIf the end gap is found to exceed the limitindicated
below, replace it with new oneThe end gap of each ring is to be measured with the ring fitted squarely into the cylinder
bore and held at the least worn part near the cylinder bottom, as shown in Fig0990().20803 Service Limit Thickness gauge