1988-1992 Suzuki LT250R Service Manual, Page 95Get this manual

1988-1992 Suzuki LT250R Service Manual, Page 95

TMTMTMTMTMTMTMTMSYSTEM INSPECTiON Before remo ing the radiator and draining coolant inspect the diating system for the following
the testerMake sure that the pressu built-up stops at 1.1 0.15 kgcm and that, with the tester held at standstill, the cap
is cadable of that pressure for at least 10 secondsTMTMTMTMTMTMTMTM the cap if it is found not to satisfy eitHer of these
two requ irementsI 2Test the adiator cap Radiator cap tester Radiator cap Radiator cJ valve release TMTMTMTMTMTMTMTM I 110
15 kPa 1.1 0.15 gcm 2)15.6 2.1 psi Before instatling the cap to the tester, apply water to sealing su,facesI 3Road dirtl
or trash stuck to the radiator fins must be rkmovedUse of compressed air is recommendJd for this cleaningFins bent down or
dented Ican be repaired by straightening them with the blade of small screwdriver4Any watetrl hose found in cracked condition