1988-1992 Suzuki LT250R Service Manual, Page 151Get this manual

1988-1992 Suzuki LT250R Service Manual, Page 151

:GHASSIS 7-30 TOE-INI ADJUSTMENT The proce ure for adjusting the toe-in is as follows Place vehicle on level ground and set
the distance and B, place the weight (7!kg, 165bs) on the seat Temporarily tighten the four lock nuts Check tlat the distances
and (in illustration) are equ IIf the distances and are not equal, readjust the tie-rod, right or left, whichever makes tile
toe-in value closer to the specificationCheck tile toe-in again by measuring the distances and BI If the tpe-in is not within
specification, repeat the TMTMTMTMTMTMTMTMTMTMTM as above until the proper toe-in value is obtained and at the same time