1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 108Get this manual

1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 108

With the head snugly seated on the cylinder, secure it by tightening the nuts diagonallyTighten the cylinder head nuts to
chain will be caught between the crankcase and cam chain drive sprocketNOTE: Apply grease on the cam sprocket locating pin
and install the pin into the camshaft Engage the chain on the cam sprocket with the locating pin hole at just before top
positionNOTE: Do not rotate the generator rotor while doing thisWhen the sprocket is not positioned correctly, turn the sprocketWhen
installing the camshaft into the cam sprocket, pay attention not to dislodge the locating pin or it may fall into the crankcase
Align the marks on the camshaft so they are parallel with the surface of the cylinder head Install the Coring into the groove