1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 122Get this manual

1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 122

SHAFT DRIVE AND DIFFERENTIAL (LTF300F) Place the secondary driven output shaft assembly on the crankcase using the special
to the chart at the right for appropriate changesNOTE: When changing the shims, measure the thickness of old shimsUsing the
thickness of the old shims as guide, adjust the backlash by referring to the chart at the right Backlash Under 0.07 mm (0.003
in) 0.07-0.15 mm (0.003-0.006 in) Over 0.15 mm (0.006 in) Shim adjustment Decrease shim thickness Correct Increase shim thickness
List of shims (secondary driven gear shims) (See p4-11 Part No09181-25186 09181-25051 09181-25052 09181-25053 09181-25054