1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 123Get this manual

1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 123

SHAFT DRIVE AND DIFFERENTIAL (LTF300F) TOOTH CONTACT After backlash adjustment is carried out, the tooth contact must be
secondary drive bevel gear and secondary driven bevel gear must be changed, tooth contact should be rechecked until it is
correct A CAUTION I After the tooth contact adjustment has been completed, the backlash must be rechecked, because it may
have changedRefer to the Backlash check subsection, and readjust until t,ooth contact and backlash are both within the specificationsIf
you cannot maintain the correct tooth contact when adjusting backlash, both the secondary drive and driven bevel gears must
be replacedTooth contact Contact at tooth top Shim adjustment Increase thickness of shims Decrease thickness of shims List
of shims (secondary drive gear shim) (See p4-11 Part No24935-19800-025 (Shim thickness 0.25 mm) 24935-19800-030 (Shim thickness
0.30 mm) 24935-19800-035 (Shim thickness 0.35 mm) 24935-19800-090 24935-19800-095 24935-19800-100 24935-19800-105 24935-19800-110