1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 135Get this manual

1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 135

SHAFT DRIVE AND DIFFERENTIAL (LTF300F) Apply THREAD LOCK SUPER "1303" or "1322" to the threads of gear shaft, and then tighten
preload: 30-70 Ncm (3-7 kg-cm, 2.6-6.1 Ib-in) If the bearing pre load is not within the specification, retighten the nut
to the specified torque and bring the preload to the specification Front drive bevel gear nut: 90-110 Nm (9.0-11.0 kg-m,
65.0-79.5Ib-ft) I CAUTION I It is necessary to check the backlash and tooth contact when changing the gear, bearing andor
outer raceREFER TO THE SHIM ADJUSTMENT SECTIONDIFFERENTIAL BEVEL GEAR CASE Install the right side gear, removed shims, pinion