1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 139Get this manual

1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 139

SHAFT DRIVE AND DIFFERENTIAL (LT-F300F) Install the removed shim on the drive bevel gear housing Install the drive bevel
mm (0-0.002 in) NOTE: If the backlash is not within the specification, adjust the shim thickness as follows: Remove the shims
from the differential bevel gear hub, and measure the thickness If the backlash is too large: Install thinner shim pack between
the final driven bevel gear and the differential bevel gear hub If the backlash is too small: Install thicker shim pack between
the final driven bevel gear and the differential bevel gear hub List of shim (final driven bevel gear shims) (See p4-30 Part