1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 202Get this manual

1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 202

CHASSIS Apply SUZUKI SUPER GREASE "A" to the steering shaft holders and dust seals before remounting the steering shaft holders
the new cotter pins into the bolts TIE ROD Tighten the tie rod end nuts to the specified torqueTie rod end nut: 29 Nm (2.9
kg-m, 21.0 Ib-ft) NOTE: After installing the tie rod nut, install the new cotter pins When installing the tie rod, make sure
that the narrow end of the tie rod comes out I ACAUTION I The locknuts with yellow finished surface have left-hand threads
Apply THREAD LOCK SUPER "1303" or "1322" to the steering knuckle arm end pinch bolt and then tighten them to the specified