1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 203Get this manual

1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 203

CHASSIS HANDLEBAR Set the handlebar to match its punched mark to the mating face of the handlebar clamps Secure each handlebar
The locknuts with yellow finished surface have lefthand threads Measure the distance and of the front wheels (in illustration)
and adjust the tie rodsright and left, to within the specified range=Toe-in Toe-in: 16-24 mm (0.63-0.94 in) Temporarily tighten
the four locknuts Check that the distance and (in illustration) are equalIf the distance and are not equalreadjust the tie
rodright or left, whichever makes the toe-in value closer to the specificationCheck the toe-in again by measuring the distances
and If the toe-in is not within the specification, repeat the adjustment as above until proper toe-in value is obtained and