1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 226Get this manual

1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 226

CHASSIS RANGE LEVER CABLE Apply SUZUKI SUPER GREASE "A" to the sliding parts of the range lever cable and the range lever
and then tighten the bolt to the specified torqueRange lever bolt: N-m (0.7 kg-m, 5.0 Ib-ft) I CAUTION I Make sure that the
installation angle of the range lever is accurate and its position is adjusted properlyDo not to kink the push-pull cables
during installingKinking the push-pull cables will increase the sliding resistance and cause improper shifting Install the
range lever cable, washer, and E-ring to the range lever Place the range lever cable eye rod between the two tabs of the
shift lever and turn the range lever cable adjusting nuts to align the range lever cable eye rod hole with the pin holes
in the tabs on the shift lever Tighten the adjusting nuts to securely install the range lever cable to the range lever stopper