1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 321Get this manual

1999-2004 Suzuki King Quad LT-300 300F ATV Factory Service Manual, Page 321

LTF300Y 300FY (2000MODEL) Before removing the pilot screw, its setting must be determinedSlowly turn the pilot screw clockwise
plugSet the drill-stop mm from the end of the bit to prevent drilling into the pilot screwCarefully drill through the plug
Thread self-tapping sheet metal screw into the plugPull on the screw head with pliers to remove the plugCarefully clean any
metal shavings from the area Slowly turn the pilot screw clockwise and count the number of turns until the screw is lightly
seatedMake note of how many turns were made so the screw can be reset correctly after cleaning Remove the pilot screw along
with the spring, washer, and 0ring After cleaning, reinstall the pilot screw to the original setting by turning the screw