2002-2007 Suzuki 500 LTA Service Manual, Page 108Get this manual

2002-2007 Suzuki 500 LTA Service Manual, Page 108

Check the frontrear output shaft to rotate smoothly SHIM ADJUSTMENT BACKLASH Install the output driven gear and drive bevel
gear backlash Standard: 0.030.15 mm (0.0010.006 in) For driven bevel gear ( Part No09181-25051 09181-25052 09181-25053 09181-25054
09181-25055 09181-25056 09181-25057 09181-25058 09181-25059 09181-25060 09181-25061 09181-25062 09181-25063 Shim thickness
0.60 mm (0.0236 in) 0.65 mm (0.0256 in) 0.70 mm (0.0276 in) 0.75 mm (0.0295 in) 0.80 mm (0.0315 in) 0.85 mm (0.0335 in) 0.90
mm (0.0354 in) 0.95 mm (0.0374 in) 1.00 mm (0.0394 in) 1.05 mm (0.0413 in) 1.10 mm (0.0433 in) 1.15 mm (0.0453 in) 1.20 mm
(0.0472 in) NOTE: Adjust the backlash by referring to the chart at the right and using the thickness of the removed shims