2002-2007 Suzuki 500 LTA Service Manual, Page 160Get this manual
DRIVE TRAIN FRONT DRIVE (DIFFERENTIAL) INSTALLATION Install the front drive (differential) in the reverse order of removalPay
45 Nm (4.5 kgf-m, 32.5 lb-ft) Install new stopper ring into its groove in the splines Apply grease to the splines of the
drive shafts and install the drive shafts to the front drive (differential) gear case99000-25030: SUZUKI SUPER GREASE "A"
(USA) 99000-25010: SUZUKI SUPER GREASE "A" (Others) Be careful not to damage the oil seal in the front drive (differential)
gear case NOTE: After installing both drive shafts, check the stopper rings are seated properly by pulling on both sides