2002-2007 Suzuki 500 LTA Service Manual, Page 161Get this manual

2002-2007 Suzuki 500 LTA Service Manual, Page 161

DRIVE TRAIN SHIM ADJUSTMENT BACKLASH Install the removed left and right side shims and differential assembly Assemble the
correctRefer to the chart at the right for the appropriate shim thicknessBacklash Standard: 0.05 0.10 mm (0.0020 0.0040 in)
NOTE: Adjust the backlash by referring to the chart at the right and using the thickness of the removed shims as guideBacklash
Under 0.05 mm (0.0020 in) 0.05 0.10 mm (0.0020 0.0040 in) Over 0.10 mm (0.0040 in) Shim adjustment Increase shim thickness
Correct Decrease shim thickness For differential ring gear ( Shim thickness 0.70 mm (0.0276 in) 0.75 mm (0.0295 in) 0.80
mm (0.0315 in) 0.85 mm (0.0335 in) 0.90 mm (0.0354 in) 0.95 mm (0.0374 in) 1.00 mm (0.0394 in) 27445-38FA0 (Shim set: 16
pcs) 1.05 mm (0.0413 in) 1.10 mm (0.0433 in) 1.15 mm (0.0453 in) 1.20 mm (0.0472 in) 1.25 mm (0.0492 in) 1.30 mm (0.0512
in) 1.35 mm (0.0531 in) 1.40 mm (0.0551 in) 1.45 mm (0.0571 in) If the backlash is too small, replace the right side shim(s)