2002-2007 Suzuki 500 LTA Service Manual, Page 162Get this manual

2002-2007 Suzuki 500 LTA Service Manual, Page 162

DRIVE TRAIN LEFT SIDE SHIM SELECTION Install the removed right side shim(s) and differential assembly Put few pieces of solder
4-4) Measure the thickness of compressed solder with the micrometer09900-20205: Micrometer Select the proper size of shim(s)
from the right chart, according as the compressed solder thickness After selecting the proper size of shim(s), check or adjust
the backlash and tooth contact For left side of differential ring gear4-20) Part NoShim thickness 0.70 mm (0.0276 in) 0.75
mm (0.0295 in) 0.80 mm (0.0315 in) 0.85 mm (0.0335 in) 0.90 mm (0.0354 in) 0.95 mm (0.0374 in) 1.00 mm (0.0394 in) 27445-38FA0