2002-2007 Suzuki 500 LTA Service Manual, Page 172Get this manual

2002-2007 Suzuki 500 LTA Service Manual, Page 172

DRIVE TRAIN Remove the bearing from the shaft with commercially available bearing puller or hydraulic press NOTE: If there
is no abnormal condition, the bearing removal is not necessaryThe removed bearing must be replaced with new one REAR DRIVE
INSPECTION PARKINGREAR DRIVE SHAFT Inspect the parking pawl and parking gear for wear and damageIf any defects are found,
replace the pawl and gear as setPARKING PAWL AND PARKING GEAR REMOVAL 244-23, Inspect the splines of rear drive shaft and