2002-2007 Suzuki 500 LTA Service Manual, Page 196Get this manual

2002-2007 Suzuki 500 LTA Service Manual, Page 196

FUEL SYSTEM Remove the following partsMain jet and needle jet holder Slow jet Starter jet Pilot screw NOTE: Before removing
the end of the bit to prevent drilling into the pilot screwCarefully drill through the plug Thread self-tapping sheet metal
screw into the plugPull on the screw head with pliers to remove the plugCarefully clean any metal shavings from the area
Slowly turn the pilot screw clockwise and count the number of turns until the screw is lightly seatedMake note of how many
turns were made so the screw can be reset correctly after cleaning Remove the pilot screw along with the spring, washer and
Oring After cleaning, install the pilot screw to the original setting by turning the screw in until it lightly seats, and
then backing it out the same number of turns counted during disassembly Install new plug by tapping it into place with punchDrill-stop