2002-2007 Suzuki 500 LTA Service Manual, Page 198Get this manual

2002-2007 Suzuki 500 LTA Service Manual, Page 198

FUEL SYSTEM NEEDLE VALVE INSPECTION If foreign matter is caught between the valve seat and the needle valve, the gasoline
upside downMeasure the float height while the float arm is just contacting the needle valve using venier calipersBend the
tongue as necessary to bring the float height to the specified level09900-20101: Venier calipers Float height17.0 1.0 mm
(0.67 0.04 in) REASSEMBLY Reassemble the carburetor in the reverse order of disassemblyPay attention to the following points:
PILOT SCREW After cleaning, install the pilot screw to the original setting by turning the screw in until it lightly seats,
and then backing it out the same number of turns counted during disassemblyPilot screw Carburetor body Replace the removed