2002-2007 Suzuki 500 LTA Service Manual, Page 264Get this manual

2002-2007 Suzuki 500 LTA Service Manual, Page 264

CHASSIS Apply SUZUKI SUPER GREASE "A" to the steering shaft holders and dust seals before remounting the steering shaft holders99000-25030:
properly( 9-11, 14 and 18) TIE ROD Tighten the tie rod end nuts to the specified torqueTie rod end nut: 35 Nm (3.5 kgf-m,
25.5 lb-ft) NOTE: After installing the tie rod end nuts, install the new cotter pins into the tie rod end When installing
the tie rod, make sure the narrow end the tie rod comes outof The locknuts have left-hand threads HANDLEBARS When installing
the lower handlebar holder to the steering shaft, the higher mating portion must face to forward Set the handlebars to match