2002-2007 Suzuki 500 LTA Service Manual, Page 272Get this manual

2002-2007 Suzuki 500 LTA Service Manual, Page 272

CHASSIS BRAKE CALIPER REASSEMBLY AND REMOUNTING Reassemble and remount the brake caliper in the reverse order of removal
components, use the specified brake fluidNever use different types of fluid or cleaning solvents such as gasoline, kerosine,
etc Replace the removed piston seals and dust seals with new ones Apply brake fluid to all of the seals, brake caliper bores
and pistons before reassemblyPISTON SEALS Install the piston seal and dust seal as shown BRAKE CALIPER HOLDER Tighten the
pin to the caliper holder torque to the specified Caliper holder pin:18 Nm (1.8 kgf-m, 13.0 lb-ft) Apply SUZUKI SILICON GREASE