2002-2007 Suzuki 500 LTA Service Manual, Page 300Get this manual

2002-2007 Suzuki 500 LTA Service Manual, Page 300

ELECTRICAL SYSTEM AUTIONS IN SERVICING CONNECTORS When disconnecting connector, be sure to hold the terminals; do not pull
to the "WIRE HARNESS ROUTING" section for proper clamping procedures( 9-11 to 9-13) Bend the clamp properly, as shown in
the illustration When clamping the wire harness, do not allow it to hang down Do not use wire or any substitutes for the
band-type clamp When fuse blows, always investigate the cause, correct the problem, and then replace the fuse Do not use
fuse of different capacity Do not use any substitutes for the fuse (e.g wire) SEMI-CONDUCTOR EQUIPPED PARTS Do not drop any
part that contains semi-conductor (e.g CDI unit, regulatorrectifier) When inspecting the part, follow the inspection instructions