2002-2009 Suzuki LT-F250 Ozark Service Manual, Page 18Get this manual

2002-2009 Suzuki LT-F250 Ozark Service Manual, Page 18

PERIODIC MAINTENANCE VALVE CLEARANCE Inspect initially at month and every months thereafterExcessive valve clearance results
(TDC) of the compression stroke Turn the crankshaft until the piston reaches TDC on the compression stroke by turning the
recoil starter 2Turn the recoil starter until the line on the generator rotor is aligned with the mark on the crankcaseNOTE:
The crankshaft can be turned to align the line and mark by slowly pulling the recoil starter lope without removing the ricoil
starter Insert the thickness gauge to check the clearance between the valve stem end and the adjusting screw on the rocker
armValve clearance (when cold) IN: 0.03 0.08 mm (0.001 0.003 in) EX: 0.08 0.13 mm (0.003 0.005 in) 09900-20803: Thickness