2002-2009 Suzuki LT-F250 Ozark Service Manual, Page 72Get this manual

2002-2009 Suzuki LT-F250 Ozark Service Manual, Page 72

CYLINDER CYLINDER DISTORTION Check the gasketed surface of the cylinder for distortion with straightedge and thickness gauge,
bore Service Limit: 66.090 mm (2.6020 in) 09900-20508: Cylinder gauge set PISTON DIAMETER Using micrometer, measure the piston
outside diameter at the place shown in FigIf the measurement is less than the limit, replace the pistonPiston diameter Service
Limit: 65.880 mm (2.5937 in) 09900-20203: Micrometer (50 75 mm) PISTON-TO-CYLINDER CLEARANCE As result of the aforesaid measurement,
if the piston-to-cylinder clearance exceeds the following limit, overhaul the cylinder and use an oversize piston, or replace