2002-2009 Suzuki LT-F250 Ozark Service Manual, Page 73Get this manual

2002-2009 Suzuki LT-F250 Ozark Service Manual, Page 73

PISTON RING TO GROOVE CLEARANCE Using thickness gauge, measure the side clearances of the 1st and 2nd ringsIf any of the
in) (2nd): 1.17 1.19 mm (0.046 0.047 in) 09900-20803: Thickness gauge 09900-20205: Micrometer (0 25 mm) PISTON RING FREE
END GAP AND END GAP Before installing piston rings, measure the free end gap of each ring using vernier calipersNext, fit
the ring in the cylinder, and measure each ring end gap using thickness gaugeIf any ring has an excess end gap, replace the
ringPiston ring free end gap Service Limit (1st)7.0 mm (0.28 in) (2nd): 7.2 mm (0.28 in) Piston ring end gap Service Limit