2002-2009 Suzuki LT-F250 Ozark Service Manual, Page 76Get this manual

2002-2009 Suzuki LT-F250 Ozark Service Manual, Page 76

CLUTCH DRIVE PLATES NOTE: Wipe off engine oil from the clutch drive plates with clean rag Measure the thickness of drive
Vernier calipers CLUTCH DRIVEN PLATES NOTE: Wipe off engine oil from the clutch driven plates with clean rag Measure each
driven plate for distortion with thickness gauge and surface plate Replace driven plates which exceed the limitDriven plate
distortion Service Limit: 0.10 mm (0.004 in) 09900-20803: Thickness gauge CLUTCH SPRING Measure the free length of each coil
spring with vernier calipers, and compare the length with the specified limit Replace all the springs if any spring is not