2002-2009 Suzuki LT-F250 Ozark Service Manual, Page 203Get this manual

2002-2009 Suzuki LT-F250 Ozark Service Manual, Page 203

CHASSIS TOE-IN ADJUSTMENT Adjust the toe-in as follows: Place the vehicle on level ground and set the handlebars straightMake
rod to the right or left until the toe-in is within the specified rangeAToe-in Toe-in Standard: mm (0.08 0.16 in) Temporarily
tighten the four locknuts Check that the distances (C and D) are equal, as shownIf the distances are not equal, adjust the
tie rod to the right or left until the toe-in is within specificationCheck the toe-in again by measuring distances and If
the toe-in is not within specification, repeat the adjustment as above until the proper toe-in is obtained and distances