2003-2005 Suzuki LT-A500F Service Manual, Page 23Get this manual

2003-2005 Suzuki LT-A500F Service Manual, Page 23

PERIODIC MAINTENANCE Connect the electric tachometer or the multi circuit tester to the high-tension cord Start the engine
cap Reinstall the drain plug and the gasketTighten the engine oil drain plug to the specicied torque, and then pour the new
oil through the oil filler holeWhen performing an oil change (without oil filter replacement), the engine will hold about
2.5 (2.6 US qt, 2.2 lmp qt) of oilUse an engine oil that meets the API service classifications SF or SG and that has viscosity
rating of SAE 10W40Engine oil drain plug: 23 Nm (2.3 kgf-m, 16.5 lb-ft) Install the oil filler cap Start the engine and allow
it to run for few minutes at idling speed Turn off the engine and wait about three minutes, and then check the oil level