2003-2005 Suzuki LT-A500F Service Manual, Page 82Get this manual

2003-2005 Suzuki LT-A500F Service Manual, Page 82

PISTON RING FREE END GAP AND END GAP Before installing piston rings, measure the free end gap of each ring using vernier
gauge PISTON PIN AND PIN BORE Using small bore gauge, measure the piston pin bore inside diameter, and using micrometer,
measure the piston pin outside diameterIf the reading exceeds following limit, replace both piston and piston pinPiston pin
bore Service Limit: 23.030 mm (0.9067 in) 09900-20602: Dial gauge (11000 mm, mm) 09900-22403: Small bore gauge (18 35 mm)
Using micrometer, measure the piston pin outside diameter at three positionsPiston pin O.DService Limit: 22.980 mm (0.9047