2003-2005 Suzuki LT-A500F Service Manual, Page 83Get this manual

2003-2005 Suzuki LT-A500F Service Manual, Page 83

CONRODCRANKSHAFT CONROD SMALL END I.DUsing caliper gauge, measure the conrod small end inside diameterConrod small end I.DService
clearance with thickness gaugeConrod big end side clearance Service Limit: 1.0 mm (0.04 in) 09900-20803: Thickness gauge
If the clearance exceeds the limit, replace the crankshaft assembly with new one or bring the deflection and the side clearance
within the service limit by replacing the worn parts (conrod, big end bearing, crank pin, etc with new onesCRANKSHAFT RUNOUT
Support the crankshaft with "V" blocks as shown, with the two end journals resting on the blocksPosition the dial gauge,
as shown, and rotate the crankshaft slowly to read the runoutCorrect or replace the crankshaft if the runout is greater than