2003-2005 Suzuki LT-A500F Service Manual, Page 108Get this manual

2003-2005 Suzuki LT-A500F Service Manual, Page 108

Check the frontrear output shaft to rotate smoothly SHIM ADJUSTMENT BACKLASH Install the output driven gear and drive bevel
gear backlash Standard: 0.030.15 mm (0.0010.006 in) NOTE: Adjust the backlash by referring to the chart at the right and
using the thickness of the removed shims as guideBacklash Under 0.03 mm (0.001 in) 0.030.15 mm (0.0010.006 in) Over 0.15
mm (0.006 in) Shim adjustment Decrease shim thickness Correct Increase shim thickness For driven bevel gear ( Part No09181-25051
09181-25052 09181-25053 09181-25054 09181-25055 09181-25056 09181-25057 09181-25058 09181-25059 09181-25060 09181-25061 09181-25062
09181-25063 Shim thickness 0.60 mm (0.0236 in) 0.65 mm (0.0256 in) 0.70 mm (0.0276 in) 0.75 mm (0.0295 in) 0.80 mm (0.0315