2003-2005 Suzuki LT-A500F Service Manual, Page 177Get this manual

2003-2005 Suzuki LT-A500F Service Manual, Page 177

DRIVE TRAIN BEVEL RING GEARSHIM Place the removed washer and shim(s) on the gear case bearing (at the left bearing), then
the backlash and tooth contact have been checked or adjusted, install new O-ring and apply sealant Apply THREAD LOCK SUPER
"1303" to the case cover bolts and tighten them to the specified torque in crisscross pattern99000-32030: THREAD LOCK SUPER
"1303" Gear case cover bolt: 23 Nm (2.3 kgf-m, 16.5 lb-ft) NOTE: After the backlash and tooth contact have been checked or
adjusted, apply THREAD LOCK SUPER "1303" to the case cover boltsREAR DRIVE SHAFT PARKING Drive the new bearing into the rear