2003-2005 Suzuki LT-A500F Service Manual, Page 181Get this manual

2003-2005 Suzuki LT-A500F Service Manual, Page 181

DRIVE TRAIN When installing the parking cam lever, align the punched marks on the shaft and lever Tighten the lever bolt
the ring gearIf the backlash is not within specification, the shim must be changed and the backlash should be re-checked
until correctRefer to the chart at the right for the appropriate shim thicknessBacklash Standard: 0.02 0.06 mm (0.0008 0.0024
in) .Without gear case cover specification 0.08 0.13 mm (0.0031 0.0051 in) .Gear case cover assembled specification NOTE:
Adjust the backlash by referring to the chart at the right and using the thickness of the removed shims as guideBacklash
Under 0.02 mm (0.0008 in) 0.02 0.06 mm (0.0008 0.0024 in) Over 0.06 mm (0.0024 in) Shim adjustment Increase shim thickness
Correct Decrease shim thickness For left side of ring gear ( Part No27326-09F70-030 27326-09F70-035 27326-09F70-040 27326-09F70-050
27326-09F70-060 Shim thickness 0.30 mm (0.0118 in) 0.35 mm (0.0138 in) 0.40 mm (0.0157 in) 0.50 mm (0.0197 in) 0.60 mm (0.0236