2003-2005 Suzuki LT-A500F Service Manual, Page 241Get this manual

2003-2005 Suzuki LT-A500F Service Manual, Page 241

CHASSIS BRAKE CALIPER REASSEMBLY AND REMOUNTING Reassemble and remount the brake caliper in the reverse order of removal
the components, use the specified brake fluidNever use different types of fluid or cleaning solvents such as gasoline, kerosine,
etc Replace the removed piston seals and dust seals with new ones Apply brake fluid to all of the seals, brake caliper bores
and pistons before reassemblyPISTON SEALS Install the piston seal and dust seal as shown BRAKE CALIPER HOLDER Tighten the
pin to the caliper holder to the specified torqueCaliper holder pin: 18 Nm (1.8 kgf-m, 13.0 lb-ft) Apply SUZUKI SILICON GREASE