2003 Suzuki LT-Z400 Factory Service Manual, Page 17Get this manual

2003 Suzuki LT-Z400 Factory Service Manual, Page 17

ADJ The clearance is the shim with thicker or tllinner shirn Remove the intake or exhaust camshafts0) Remove Ule and shim
it is of the proper sizeRefer to the shim selection table for details, NOTE:Be sure to apply molybdenum oil solution to the
and bottom faces of the shim,When the tappet shim, make sure that the side with the numbers face towards the tappet: shim
and camshalts, rotate the is depressed (this will out oil between the tappet shim and the that could cause an incorrect measurement)After
the crankshaft, check the clearance again to make sure that it is within specification WIlen the cylinder head cover, SUZUKI