2003 Suzuki LT-Z400 Factory Service Manual, Page 66Get this manual

2003 Suzuki LT-Z400 Factory Service Manual, Page 66

CUT FINAL If the contact area is too low or too narrow, use the 60 cutter to raise and widen the contact areaIf the contact
of valve compound after the final cut is madeThe finished valve seat should have smooth finish but not or This will soft
surface for the final the valve which will occur the first few seconds of the After clearance after the be sure to check
head has been installed VALVE SEAT SEALING CONDITION INSPECTION With tt16 valve and valve pour small quanof gasoline into