2004-2009 Suzuki LT-Z250 Service Manual, Page 72Get this manual

2004-2009 Suzuki LT-Z250 Service Manual, Page 72

CAMSHAFT The camshaft should be checked for wear and also for runout of cams and journals if the engine has been noted to
the plastigauge to read the clearance, which is specified as follows: Camshaft journal oil clearance Service Limit: 0.150
mm (0.0059 in)09900-22302: Plastigauge NOTE: To properly measure the oil clearance with plastigauge, all gasket material
must be removed from fitting surfaces of cylinder head and coverDo not apply SUZUKI BOND until after the oil clearance has
been determinedTighten the cylinder head cover bolts evenly and diagonally to the specified torque" Cylinder head cover bolt:
10 Nm (1.0 kgf-m, 7.3 lb-ft) NOTE: Do not rotate the camshafts with the plastigauge in placeRemove the cylinder head cover,
read the width of the compressed plastigauge with envelope scaleThis measurement should be taken at the widest part of the