2004-2009 Suzuki LT-Z250 Service Manual, Page 77Get this manual

2004-2009 Suzuki LT-Z250 Service Manual, Page 77

CONROD AND CRANKSHAFT CONROD SMALL END I.DMeasure the conrod small end inside diameter with the small bore gaugeIf the conrod
Dial gauge (1100 mm) 09900-21304: V-block CONROD BIG END SIDE CLEARANCE Slide the conrod big end to one side and measure
the side clearance with the thickness gaugeIf the clearance exceeds the service limit, replace the crankshaft assembly with
new one or bring the deflection and the side clearance within the service limit by replacing the worn parts (conrod, big
end bearing, crank pin, etc with new ones Conrod big end side clearance Service Limit: 1.0 mm (0.04 in)09900-20803: Thickness
gauge CRANKSHAFT RUNOUT Support the crankshaft with the V-blocks and measure the crankshaft runout with the dial gaugeIf