2004-2009 Suzuki LT-Z250 Service Manual, Page 78Get this manual

2004-2009 Suzuki LT-Z250 Service Manual, Page 78

CLUTCH DRIVE PLATES NOTE: Wipe off engine oil from the clutch drive plates with clean ragMeasure the thickness of drive
Vernier calipers CLUTCH DRIVEN PLATES NOTE: Wipe off engine oil from the clutch driven plates with clean ragMeasure each
driven plate for distortion with thickness gauge and surface plateReplace driven plates which exceed the limit Driven plate
distortion Service Limit: 0.10 mm (0.004 in)09900-20803: Thickness gauge CLUTCH SPRING Measure the free length of each coil
spring with vernier calipers, and compare the length with the specified limitReplace all the springs if any spring is not