2004-2009 Suzuki LT-Z250 Service Manual, Page 82Get this manual

2004-2009 Suzuki LT-Z250 Service Manual, Page 82

REASSEMBLY Assemble the transfer in the reverse order of disassemblyPay attention to the following points: NOTE:Always use
ring, always ensure that it is completely seated in its groove and securely fittedWhen installing new snap ring, pay attention
to the direction of the snap ringFit it to the side where the thrust is as shown in the figure Sharp edge Install the clutch
sleeve hub nut onto the right end of the countershaft Apply THREAD LOCK SUPER to the internal face of the 2nd drive gearInstall