2004-2009 Suzuki LT-Z250 Service Manual, Page 94Get this manual

2004-2009 Suzuki LT-Z250 Service Manual, Page 94

SECONDARY GEAR SHIMS ADJUSTMENT Remove the secondary bevel gear cover Hold the bearings with the special tool& 09921-21910:
09181-25054 09181-25055 09181-25056 09181-25057 09181-25058 09181-25059 09181-25060 09181-25061 09181-25062 09181-25063 Shim
thickness 0.60 mm (0.0236 in) 0.65 mm (0.0256 in) 0.70 mm (0.0276 in) 0.75 mm (0.0295 in) 0.80 mm (0.0315 in) 0.85 mm (0.0335
in) 0.90 mm (0.0354 in) 0.95 mm (0.0374 in) 1.00 mm (0.0394 in) 1.05 mm (0.0413 in) 1.10 mm (0.0433 in) 1.15 mm (0.0453 in)
1.20 mm (0.0472 in) NOTE: Adjust the backlash by referring to the chart at the right and using the thickness of the removed
shims as guideBacklash Under 0.03 mm (0.001 in) 0.03 0.15 mm (0.001 0.006 in) Over 0.15 mm (0.006 in) Shim adjustment Decrease