2004-2009 Suzuki LT-Z250 Service Manual, Page 150Get this manual

2004-2009 Suzuki LT-Z250 Service Manual, Page 150

FUEL SYSTEM NEEDLE VALVE INSPECTION If foreign matter is caught between the valve seat and the needle valve, the gasoline
upside downMeasure the float height while the float arm is just contacting the needle valve using vernier calipersBend the
tongue as necessary to bring the float height to the specified level$ Float height A: 13.0 1.0 mm (0.51 0.04 in) 09900-20101:
Venier calipers REASSEMBLY Reassemble the carburetor in the reverse order of disassemblyPay attention to the following points:
PILOT SCREW After cleaning, install the pilot screw to the original setting by turning the screw in until it lightly seats,
and then backing it out the same number of turns counted during disassembly1 Pilot screw Carburetor bodyReplace the removed