2004-2009 Suzuki LT-Z250 Service Manual, Page 176Get this manual

2004-2009 Suzuki LT-Z250 Service Manual, Page 176

CHASSIS BRAKE PAD REPLACEMENT Remove the front wheel(!7-11) Remove the brake caliper mounting bolts and brake pad mounting
pad mounting pin: 18 Nm (1.8 kgf-m, 13.0 lb-ft) Brake caliper mounting bolt: 26 Nm (2.6 kgf-m, 19.0 lb-ft) NOTE: After replacing
the brake pads, pump the brake lever few times to check for proper brake operation and then check the brake fluid level BRAKE
FLUID REPLACEMENT Place the vehicle on level surface and keep the handlebar straightRemove the master cylinder reservoir