2004-2009 Suzuki LT-Z250 Service Manual, Page 197Get this manual

2004-2009 Suzuki LT-Z250 Service Manual, Page 197

CHASSIS REASSEMBLY AND REMOUNTING Reassemble and remount the steering stem in the reverse order of removal and disassemblyPay
the dust seal to the steering shaft Install the new O-ring and dust seal to the steering shaft Tighten the steering shaft
nut to the specified torque" Steering shaft nut: 49 Nm (4.9 kgf-m, 35.5 lb-ft) Install new cotter pin$ Replace the removed
cotter pin with new one Apply SUZUKI SUPER GREASE to the steering shaft holders and dust seals before remounting the steering