2004-2009 Suzuki LT-Z250 Service Manual, Page 198Get this manual

2004-2009 Suzuki LT-Z250 Service Manual, Page 198

CHASSIS Tighten the steering shaft holder bolts to the specified torque" Steering shaft holder bolt: 23 Nm (2.3 kgf-m, 16.5
pins with new ones NOTE: When installing the tie rod, make sure the narrow end of the tie rod comes out$ The locknuts with
yellow finished surface have left-hand threads HANDLEBARS When installing the lower handlebar holder to the steering shaft,
the higher mating portion must face to forwardSet the handlebars to match its punched mark to the mating face of the handlebar