2004-2009 Suzuki LT-Z250 Service Manual, Page 200Get this manual

2004-2009 Suzuki LT-Z250 Service Manual, Page 200

CHASSIS TOE-IN ADJUSTMENT Adjust the toe-in as follows: Place the vehicle on level ground and set the handlebars straightMake
rod to the right or left until the toe-in is within the specified rangeAToe-inToe-in Standard: mm (0.20 0.16 in) Forward
Temporarily tighten the four locknutsCheck that the distances (C and D) are equal, as shownIf the distances are not equal,
adjust the tie rod to the right or left until the toe-in is within specificationCheck the toe-in again by measuring distances
and BIf the toe-in is not within specification, repeat the adjustment as above until the proper toe-in is obtained and distances