2004-2009 Suzuki LT-Z250 Service Manual, Page 211Get this manual

2004-2009 Suzuki LT-Z250 Service Manual, Page 211

CHASSIS REAR SHOCK ABSORBER SPACER AND BEARING Remove the spacers and dust seals$ The removed dust seals must be replaced
remover 09930-30104: Sliding shaftThe removed bearing must be replaced with new one REASSEMBLY REAR SHOCK ABSORBER Press
the bearing into the rear shock absorber to the depth of mm (0.157 in) with the special tool and suitable socket wrenchNOTE:
When installing the rear shock absorber bearing, make sure that the stamped mark faces right side 09924-84521: Bearing installer
set REMOUNTING Tighten the upper and lower shock absorber mounting nuts to the specified torque of each" Rear shock absorber