2004-2009 Suzuki LT-Z250 Service Manual, Page 215Get this manual

2004-2009 Suzuki LT-Z250 Service Manual, Page 215

CHASSIS SWINGARM PIVOT BEARING Insert the spacer into the swingarm pivot bearings and then check the play by moving the spacer
SWINGARM PIVOT BEARING AND DUST SEAL Press the bearing into the swingarm pivot to the depth of 5.0 mm (0.197 in) from the
outside with the special tool and suitable socket wrenchNOTE: When installing the swingarm pivot bearing, make sure that
the stamped mark faces outside 09924-84510: Bearing installer set Apply SUZUKI SUPER GREASE to the bearings, spacers and