2004-2009 Suzuki LT-Z250 Service Manual, Page 225Get this manual

2004-2009 Suzuki LT-Z250 Service Manual, Page 225

ELECTRICAL SYSTEM CAUTIONS IN SERVICING CONNECTORS When disconnecting connector, be sure to hold the terminals; do not pull
to the WIRING HARNESS ROUTING section for proper clamping procedures(!9-11 to -14) Bend the clamp properly, as shown in the
illustrationWhen clamping the wire harness, do not allow it to hang downDo not use wire or any substitutes for the band-type
clamp When fuse blows, always investigate the cause, correct the problem, and then replace the fuseDo not use fuse of different
capacityDo not use any substitutes for the fuse (e.g wire) SEMI-CONDUCTOR EQUIPPED PARTS Do not drop any part that contains
semi-conductor (e.g CDI unit, regulatorrectifier)When inspecting the part, follow the inspection instructions carefullyNeglecting